1. EDWinXP PCB Wirelist

Select Export menu from File and browse EDWinXP PCB Wirelist from the list of export. Browse the dictionary file using the ellipsis for both the package/ parts and point to the location where the output file should be. To export the contents, click the Export button. A dialog opens were the output file (*.wrl) is saved. The output file format specification is given below.

Format Specification

The exported file can be viewed either in standard view or document view. The above format specification is the standard view format and document view looks like . This may be set prior to exporting the wirelist.

2. EDWinXP Schematic Netlist

This is a new Export facility where the Schematic netlist of the selected project is exported. The dictionary file and the location of the output file is browsed using the ellipsis. To export the contents, click the Export button. A dialog opens were the output file (*.wrs) is saved.

3. EDIF V2.0 Schematic

Select this format and choose either of the following options.

1 Schematic Netlist only – use this if only the netlist needs to be exported.
2 Schematic diagram and netlist – use this if the schematic and the netlist has to be exported.
Format Specification of EDIF
The dictionary file (*.eds, *.edd) and the location of the output file is browsed using the ellipsis. To export the contents, click the Export button. A dialog opens were the output file (*.edf) is saved.

4. Orcad PCB II Wirelist

This option exports the wirelist of the current project to the format accepted by OrCad. Select this option from the list of Export and point to the location where the output file should be. To export the contents, click the Export button. A dialog opens were the output file (*.net) is saved.

5. Scicards Netlist

This option exports the netlist of the current project to the format accepted by Scicards. Select this option from the list of Export and point to the location where the output file should be. To export the contents, click the Export button. A dialog opens were the output file (*.net) is saved. Note: For all types of export, the output format file is displayed in an ASCII viewer if View Output File is checked. The contents of the hierarchy may be exported by just clicking on the hierarchy and selecting the required output

6.CUPL Netlist

This option exports the netlist of the current project to the CUPL format. Select this option from the list of Export and point to the location where the output file (*.pld) should lie. To export the contents, click on the Export button. If the check box for View output file is active, the file is displayed in EDWinXP Viewer.

7. Xilinx Netlist

This option exports the netlist of the current project to the XILINX format. Select this option from the list of Export and point to the location where the output file (*.edn) should lie. To export the contents, click on the Export button. If the check box for View output file active the file is displayed in EDWinXP Viewer. Activate Insert I/O buffers if the selected vhdl module is the topmost module of the design.

EDWinXP can output to the following Xilinx output formats
1.Xilinx 3000 series
2.Xilinx 4000E series
3.Xilinx 4000X series
4.Xilinx 5200 series
5.Xilinx 9000 series
6.Xilinx Spartan series
7.Xilinx SpartanXL series
8.Xilinx Spartan2 series
9.Xilinx Virtex series
10.Xilinx VirtexE series
11.Xilinx Virtex2 series

8. JEDEC Netlist

Exports the netlist of the current project to the JEDEC format. Select this option from the list of Export and point to the location where the output file (*.jed) should lie. To export the contents, click on the Export button. If the check box for View output file is active the file is displayed in EDWinXP Viewer. Activate Map output file name to view the assignment of VHDL ports to the physical pins of the target PAL device.
EDWinXP can output to the following JEDEC output formats
1 16L8
2 16N8
3 16R4
4 16R6
5 16R8

9. ALTERA EDF

Exports the netlist of the current project to ALTERA EDF format.

10. EDWinXP RINF Netlist

Exports the netlist of the current project to the EDWinXP RINF Netlist format. Select this option from the list of Export and point to the location where the output file (*.net) should lie. To export the contents, click on the Export button. If the check box for View output file is active the file is displayed in EDWinXP Viewer.